MCX-E24X

Product Details

Block Diagram

MCX E24x MCUs

Get diagram PDF

Features

Operating Characteristics

Voltage range: 2.7 V to 5.5 V
Ambient temperature range: -40 °C to 105 °C for HSRUN mode, -40 °C to 125 °C for RUN mode

Core Platform

Arm™ Cortex-M4F 32-bit CPU
- Supports up to 112 MHz frequency (HSRUN mode) with 1.25 Dhrystone MIPS per MHz
- Arm Core is based on the Armv7 Architecture and Thumb®-2 ISA
- Integrated Digital Signal Processor (DSP)
- Configurable Nested Vectored Interrupt Controller (NVIC)
- Single Precision Floating Point Unit (FPU)

Memory

Up to 2 MB program flash memory with ECC
64 kB FlexNVM for data flash memory with ECC and EEPROM emulation
Up to 256 kB SRAM with ECC
Up to 4 kB of FlexRAM for use as SRAM or EEPROM emulation
Up to 4 kB Code cache to minimize the performance impact of memory access latencies
QuadSPI with HyperBus™ support

Peripherals

Mixed-signal analog
- Up to two 12-bit Analog-to-Digital Converter (ADC) with up to 32 channel analog inputs per module
- One Analog Comparator (CMP) with internal 8-bit Digital to Analog Converter (DAC)
Human-machine interface (HMI)
- Up to 128 GPIO pins with interrupt functionality
- Non-Maskable Interrupt (NMI)
Communications interfaces
- Up to three Low-Power Universal Asynchronous Receiver/Transmitter (LPUART/LIN) modules with DMA support and low power availability
- Up to three Low-Power Serial Peripheral Interface (LPSPI) modules with DMA support and low power availability
- Up to two Low-Power Inter-Integrated Circuit (LPI2C) modules with DMA support and low power availability
- Up to three FlexCAN modules (with optional CANFD support)
- FlexIO module for emulation of communication protocols and peripherals (UART, I²C, SPI, I2S, LIN, PWM, etc)
- Up to one 10/100 Mbit/s Ethernet with IEEE1588 support and two Synchronous Audio Interface (SAI) modules

Safety and Security

EdgeLock Accelerator (CSEc) implements a comprehensive set of cryptographic functions enabling Secure Boot, Secure Install, Secure Update and Secure Debug
128-bit Unique Identification (ID) number
Error-Correcting Code (ECC) on flash and SRAM memories
System Memory Protection Unit (System MPU)
Cyclic Redundancy Check (CRC) module
Internal Watchdog (WDOG)
External Watchdog monitor (EWM) module

Packaging

LQFP48: 7 x 7 x 1.4 mm, 0.5 mm pitch
LQFP64: 10 x 10 x 1.4 mm, 0.5 mm pitch
LQFP100: 14 x 14 x 1.4 mm, 0.5 mm pitch
LQFP144: 20 x 20 x 1.4 mm, 0.5 mm pitch

MCUXpresso Developer Experience

MCUXpresso ecosystem support
Selection of IDE choices
Pin, clock, peripheral, security and memory config tools
Security programming and provisioning tools
Software development kit (SDK)
Zephyr RTOS support

Product program

Product Longevity

Participating products are available for a minimum of 10 years. Designated participating products developed for the automotive, telecom and medical segments are available for a minimum of 15 years.

Read more

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

2 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Models
MCX-E24x IBIS Model

ZIPRev 1.0Jul 9, 2025 14:47:0014.5 MBMCX-E24x-IBIS

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Design Files - miscellaneous
MCX-E24x Design Files

ZIPRev 1.0Jul 9, 2025 14:35:0031.8 MBMCX-E24x-DESIGN-FILES

Account Required
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

Quick reference to our board types.

3 hardware offerings

Emulators, Probes, and Programmers
MCU-Link Debug Probe
Active

MCU-LINK
Emulators, Probes, and Programmers
MCU-Link Pro Debug Probe
Active

MCU-LINK-PRO
Evaluation and Development Boards
FRDM Development Board for MCX E245/246/247 MCUs

FRDM-MCXE247

Software

Quick reference to our software types.

1-5 of 11 software files

Application Example Software
Application Code Hub

Download Options
BSPs and Device Drivers
MCUXpresso Config Tools: Pins, Clocks and Peripherals

Download Options
Examples and Quick Start Software
MCUXpresso Software Development Kit (SDK)

Download Options
Additional software available. View our featured partner solutions.
OS and RTOS
Zephyr™ OS for Edge Connected Devices

Download Options
Debugging and Visualization Tools
FreeMASTER Run-Time Debugging Tool

Download Options
Development IDEs and Build Tools
MCUXpresso Integrated Development Environment (IDE)

Download Options
Development IDEs and Build Tools
MCUXpresso for Visual Studio Code

Download Options
Software Development Resources
Device HSM Trust Provisioning
Software Development Resources
Secure Provisioning SDK (SPSDK)

Download Options
Software Development Resources
MCUXpresso Secure Provisioning Tool

Download Options
Software Development Resources
FRDM Ecosystem Partners

Show All

Note: For better experience, software downloads are recommended on desktop.

Engineering Services

To get further assistance directly from NXP, please see our Engineering Services.

1 engineering service

Independent Design House (IDH)
Trusted Advisor Services

By Green Hills Software PlatinumHQ: Santa Barbara, United StatesSupporting Regions: Americas, APAC, EMEA

To find additional partner offerings that support this product, visit our Partner Marketplace.

Training

5 trainings

On-Demand
Flexible and Rapid Development with MCUXpresso: Getting Started with Your FRDM Development Boards Featuring MCX MCUs

37 minEnglish Level: Beginner

Account Required

On-Demand
MCUXpresso Config Tools Programmable Logic Unit

21 minEnglish Level: Beginner

Account Required

On-Demand
Dive Deeper Into NXP's MCUXpresso Ecosystem for Visual Studio Code and Application Development

Our training program on the MCUXpresso ecosystem offers essential insights for embedded development with NXP Microcontrollers.

40 minEnglish Level: Beginner

Account Required
Additional trainings are available. View our featured partner trainings.

On-Demand
Zephyr Portability Featuring MCX and i.MX RT Series

17 minEnglish Level: Intermediate

Account Required

On-Demand
Building Secure Images on MCUXpresso Secure Provisioning Tool (SEC)

This demo shows how to use MCUXpresso Secure Provisioning Tool (SEC) to create a secure image with just 6 clicks to protect your software IP.

4 minEnglish Level: Beginner

Account Required

MCX E24x MCUs

Product Details

Block Diagram

MCX E24x MCUs

Features

Operating Characteristics

Core Platform

Memory

Peripherals

Safety and Security

Packaging

MCUXpresso Developer Experience

Product program

Product Longevity

Related products

Applications

Consumer

Industrial

Buy/Parametrics

Documentation

Filter by

Application Note (5)

Using MCX E247 QuadSPI Module[AN14754]

Getting Started with EdgeLock Accelerator (CSEC) on MCX E24x[AN14729]

Power Management for MCX E24x[AN14736]

Features and Operation Modes of FlexTimer Module on MCX E24x[AN14617]

Sensorless PMSM field-oriented control (FOC) on MCXE24x[AN14616]

Data Sheet (1)

MCXE245/246/247[MCXEP144M112F70]

Errata (3)

MCXE247_0N20V Mask Set Errata[MCXE247_0N20V]

MCXE246_0N73V Mask Set Errata[MCXE246_0N73V]

MCXE245_0N57U Mask Set Errata[MCXE245_0N57U]

Fact Sheet (1)

MCX E24 Series Fact Sheet[MCXE24FS]

Reference Manual (1)

MCXE24XRM[MCXE24XRM]

User Guide (1)

MCX E24x Hardware Design Guide[UG10293]

User Manual (1)

FRDM-MCXE247 Board User Manual[UM12286]

MCXE24XRMupdated

Using MCX E247 QuadSPI Modulenew

Getting Started with EdgeLock Accelerator (CSEC) on MCX E24xnew

Power Management for MCX E24xnew

Features and Operation Modes of FlexTimer Module on MCX E24xnew

MCX E24x Hardware Design Guidenew

FRDM-MCXE247 Board User Manualupdated

MCX E24 Series Fact Sheetupdated

Design Resources

Design Files

Filter by

MCX-E24x IBIS Model

MCX-E24x Design Files

Filter By

Hardware

Filter By

Filter By

Software

Filter by

Filter By

MICRO - VELOSITYUPDATED

C/C++ OPTIMIZING COMPILERUPDATED

Engineering Services

Filter by

Training

Filter by

Filter by

Support

What do you need help with?

Suggested Links