S12ZVL Mixed-Signal MCU|MagniV

For best experience this site requires Javascript to be enabled. To enable on your browser, follow our accessibility instructions.

Click over video to play

The S12ZVL platform, part of the S12 MagniV mixed-signal MCU product line, offers a low-cost, highly integrated solution for space-constrained automotive LIN nodes. With memory sizes from 8-128K flash, the family provides scalability for platform standardization.

The S12ZVL integrates a sophisticated S12Z core with a 12 V to 5 V voltage regulator and a LIN physical layer transceiver for automotive and industrial applications such as sensor interfaces, actuators, switch panels or ambient lighting.

Reference Manual

Application Notes

Product Details

Block Diagram

S12 MagniV Mixed-Signal MCU for LIN Applications

Get diagram PDF

Features

S12Z core - 32 MHz bus speed
Up to 128 KB Flash (with ECC)
High temperature (up to 150^º C ambient)
Up to 2KB EEPROM (with ECC)
Up to 8 KB RAM (with ECC)
Analog comparator and DAC
PGA
12V Vreg to supply device + ext comp- 70mA total (170mA with ext. Ballast)
LIN physical layer
On-chip RC-oscillator trimmed to 1.3% accuracy, no ext xtal required on LIN

Product Programs

Safe Assure® (Functional Safety)

When it comes to functional safety, NXP stands for quality and reliability. Our SafeAssure program simplifies system-level safety requirements in accordance with ISO 26262.

Product Longevity

Participating products are available for a minimum of 10 years. Designated participating products developed for the automotive, telecom and medical segments are available for a minimum of 15 years.

S12ZVL Family Comparison

		48-LQFP
		S12ZVLA			S12ZVL			S12ZVL
Memory	Flash [kB]	128	96	64	128	96	64	32	16	8
	EEPROM [kB]	2		1	2		1	0.128
	RAM [kB]	8		4	8		4	1		0.5
UHV	V reg	5V / 3.3V ; 70mA or up to 170 (with ballast option / BCTL)						5V; 70mA or up to 170 (with ballast option / BCTL)
	V reg tolerance	2%			3%			3%
	PHY	LIN
	HVI	1
Analog	ADC (LB) channel	10
	ADC (LB) resolution	12 Bit			10 Bit			10 Bit
	ACMP with 8bit DAC	1			-			-
	PGA	1			-			-
	PGA levels	10/20/40/80x			-			-
Comms	SCI	2
	SPI	1
	IIC	1
	MSCAN	1						-
Tim	Timer (6+2ch)	6ch + 2ch (16 Bit)
PWM		8ch 8Bit (or 4ch 16Bit)
I/O	GPIO	35						-
	intrr. Cap. IO (5/12v)	22/1
	eVdd (5V/20mA)	1
	N-GPIOs (5V / 25mA)	3						1
	Temperature options	C / V / M						C / V / M

		32-LQFP						32-QFN			32-LQFP			32-QFN
		S12ZVLA			S12ZVL			S12ZVLA			S12ZVL			S12ZVLS
Memory	Flash [kB]	128	96	64	128	96	64	128	96	64	32	16	8	32	16
	EEPROM [kB]	2		1	2		1	2		1	0.128
	RAM [kB]	8		4	8		4	8		4	1		0.5	1
UHV	V reg	5V / 3.3V ; 70mA or up to 170 (with ballast option / BCTL)									5V; 70mA or up to 170 (with ballast option / BCTL)
	V reg tolerance	2%			3%			2%			3%
	PHY	LIN
	HVI	1
Analog	ADC (LB) channel	6						7			6
	ADC (LB) resolution	12 Bit			10 Bit			12 Bit			10 Bit
	ACMP with 8bit DAC	1			0			1			-
	PGA	1			-			1			-
	PGA levels	10/20/40/80x			-			10/20/40/80x			-
Comms	SCI	2
	SPI	1
	IIC	1
	MSCAN	1									-
Tim	Timer (6+2ch on silicon)	6ch + 2ch (16 Bit)
PWM		8ch (16Bit)									8ch 8Bit (or 4ch 16Bit)
I/O	GPIO	20
	intrr. Cap. IO (5/12v)	16/1
	eVdd (5V/20mA)	1
	N-GPIOs (5V / 25mA)	1									1			3
	Temperature options	C / V / M									C / V / M

Buy/Parametrics

‌ ‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌	‌ ‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌
‌ ‌ ‌	‌	‌	‌	‌	‌

Design Resources

Design Files

Quick reference to our design files types.

4 design files

Receive the full breakdown. See the product footprint and more in the eCad file.

Symbols and Footprints
S12ZVL_32QFN_EP - CAD Symbol and PCB Footprint - BXL File

ZIPRev 0Jun 27, 2019 14:44:0093.1 KBS9S12ZVLS16F0CFM
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
S12ZVL_48LQFP - CAD Symbol and PCB Footprint - BXL File

ZIPRev 0Sep 25, 2019 16:04:0034.5 KBS12ZVL_48LQFP-BXL
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
S12ZVL_48LQFP - CAD Symbol and PCB Footprint - BXL File

ZIPRev 0Jun 27, 2019 14:44:0097.6 KBPC912ZVL32F0VLF
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue
Symbols and Footprints
S12ZVL_64LQFP_EP - CAD Symbol and PCB Footprint - BXL File

ZIPRev 0Jul 3, 2019 14:44:00121.6 KBS912ZVML12F1MKH
DownloadToggle Dropdown
- Add to Queue
- Remove from Queue
- Recommended for large file sizes.
- View Queue

Hardware

Quick reference to our board types.

1-5 of 9 hardware offerings

Evaluation and Development Boards
S12ZVL StarterTRAK Development BoardFeatured
Active

TRK-S12ZVL
Evaluation and Development Boards
S12ZVL128 CAN and LIN Evaluation BoardFeatured
Active

DEVKIT-ZVL128
Emulators, Probes, and Programmers
Universal Multilink Development Interface
Active

UMultilink
Additional hardware available. View our featured partner solutions.
Emulators, Probes, and Programmers
Universal Multilink FX High-Speed Development Interface
Active

U-MULTILINK-FX
Emulators, Probes, and Programmers
PEmicro Cyclone programmer
Active

CYCLONE
Emulators, Probes, and Programmers
PEmicro Cyclone FX programmer

CYCLONE-FX
Evaluation and Development Boards
S12ZVL32 CAN and LIN/SCI Evaluation Board
Active

DEVKIT-S12ZVL
Reference Design
S12ZVL32 RGB LED Lighting Reference Design

S12ZVL32-LED
Reference Design
S12ZVL and NCx3320 Near-Field Communication (NFC) Door Handle Solution

NCx3320-DHRD

Show All

4 hardware offerings

Test Accessories and Debugger
Cyclone Production Programmers

Programmer for stand-alone (or cloud-connected) in-circuit flash programming, debug, & test of many NXP MCUs. Sophisticated power mgmt & dynamic data. FX line off...

By P & E Microcomputer Systems, Inc Gold Partner
Test Accessories and Debugger
Multilink Debug Probes

Multilink debug probes are BDM/JTAG debug probes for various NXP devices. Universal models support SWO debug in NXP's MCUXpresso IDE. FX model features high-speed com...

By P & E Microcomputer Systems, Inc Gold Partner
Test Accessories and Debugger
TRACE32® PowerDebug System for NXP Microcontrollers/Microprocessors

PowerDebug is Lauterbach's powerful, modular, flexible debug system. It provides the broadest coverage of supported chips and core architectures in the embedded i...

By Lauterbach GmbH Gold Partner
Complementary Silicon or Component
NOR Flash

Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash suppor...

By Micron Gold Partner

To find additional partner offerings that support this product, visit our Partner Marketplace.

S12ZVL Mixed-Signal MCU for Automotive and Industrial LIN Applications

Product Details

Block Diagram

S12 MagniV Mixed-Signal MCU for LIN Applications

Features

Product Programs

Safe Assure® (Functional Safety)

Product Longevity

S12ZVL Family Comparison

Related products

Applications

Automotive

Consumer

Industrial

Buy/Parametrics

Documentation

Filter by

Application Note (18)

AN10365, Surface mount reflow soldering - Application note[AN10365]

AN1902: Assembly Guidelines for QFN and SON Packages Application Note[AN1902]

AN12943: Spurious interrupt on MagniV – Application Note[AN12943]

AN12086: Simple Serial Bootloader for S12Z – Application Note[AN12086]

AN4731: Understanding Injection Current on NXP Automotive Microcontrollers – Application Note[AN4731]

AN5084: Hardware Design Guidelines for S12ZVL – Application Note[AN5084]

AN5122: Using NXP’s LIN Driver with the MagniV Family – Application Note[AN5122]

AN5389: S12Z MagniV LIN Bootloader – Application Note[AN5389]

AN5326: Using the Programmable Gain Amplifier in the S12ZVLA – Application Note[AN5326]

AN5264, Emulating I2C controller mode - Application notes[AN5264]

AN5176: Using the High Voltage Physical Layer in the S12ZVM – Application Note[AN5176]

AN5168: Using the ADC Module in S12ZVM – Application Note[AN5168]

AN5082: MagniV MCUs in 24V Applications – Application Note[AN5082]

AN4975: Using MSCAN on the MagniV Family – Application Note[AN4975]

AN4841: S12ZVL LIN Enabled Ultrasonic Distance Measurement – Application Note[AN4841]

AN4842: S12ZVL LIN Enabled RGB LED Lighting Application – Application Note[AN4842]

AN4723: S12Z MagniV Bootloader – Application Note[AN4723]

AN4752: FreeMASTER Usage, Serial Driver Implementation – Application Note[AN4752]

Application Note Software (9)

AN12086SW - Application note software for AN12086[AN12086SW]

Application note software for AN5122[AN5122SW]

Application software for AN5389[AN5389SW]

AN5264SW: Emulating I2C Master Mode[AN5264SW]

AN5168SW, Using the ADC Module in S12ZVM[AN5168SW]

AN4975SW: Using MSCAN on the MagniV Family - Application notes software[AN4975SW]

AN4841SW, S12ZVL LIN Enabled Ultrasonic Distance Measurement - Application notes software[AN4841SW]

AN4842SW, S12ZVL LIN Enabled RGB LED Lighting Application - Application notes software[AN4842SW]

S12Z MagniV Bootloader[AN4723SW]

Brochure (1)

MagniV mixed-signal microcontrollers – Brochure[MAGNIVFAMBR]

Errata (1)

MC9S12ZVL32, MC9S12ZVL16, MC9S12ZVL8, MC9S12ZVLS32 and MC9S12ZVLS16 – Errata[MSE9S12ZVL_0N22G]

Fact Sheet (1)

S12 MagniV® S12ZVL Family Fact Sheet[S12ZVLFS]Featured

Reference Manual (2)

S12 MagniV® S12ZVL – Reference Manual[MC9S12ZVLRM]

CPU S12Z Reference Manual - Reference Manual[S12ZCPURM]

Technical Notes (1)

MISRA Compliance in Freescale Automotive C Language Header Files - Engineering Bulletin[EB793]

User Guide (3)

Unified Bootloader – User Guide[UBLUG]

Introduction to the S12ZVL[S12ZVL-INTRO]

S12ZVL Getting Started[S12ZVLGS]

White Paper (1)

Advancements in Body Electronics[BODYDELECTRWP]Featured

S12 MagniV® S12ZVL Family Fact SheetFeatured

Advancements in Body ElectronicsFeatured

Design Resources

Design Files

Filter by

S12ZVL_32QFN_EP - CAD Symbol and PCB Footprint - BXL File

S12ZVL_48LQFP - CAD Symbol and PCB Footprint - BXL File

S12ZVL_48LQFP - CAD Symbol and PCB Footprint - BXL File

S12ZVL_64LQFP_EP - CAD Symbol and PCB Footprint - BXL File

Filter By

Hardware

Filter By

S12ZVL StarterTRAK Development BoardFeatured Active

S12ZVL128 CAN and LIN Evaluation BoardFeatured Active

Filter By

Software

Filter by

S12 MagniV^® S12ZVL Family Fact Sheet[S12ZVLFS]Featured

S12 MagniV^® S12ZVL Family Fact SheetFeatured

S12ZVL StarterTRAK Development BoardFeatured
Active

S12ZVL128 CAN and LIN Evaluation BoardFeatured
Active

Getting started with S12ZVL32 - S12 MagniV^® Example Codes