Product Longevity
Participating products are available for a minimum of 10 years. Designated participating products developed for the automotive, telecom and medical segments are available for a minimum of 15 years.
LIN Mini System Basis Chip
The TJA1128 is a LIN mini system basis chip (SBC) with a LIN transceiver, a low-dropout voltage regulator (LDO), a window watchdog, two WAKE inputs, one general purpose input (GPI) and one high-voltage multipurpose (HVMPO) output.
The voltage regulator delivers up to 85 mA and is available with 3.3 V and 5.0 V output voltages. The TJA1128 can be operated in very low-current standby and sleep modes with bus and local wake-up capability.
Product Details
Features
General Features
- Battery operating voltage range from (3.3 V) 5.0 V to 28 V
- Very low current consumption in SLEEP and STANDBY mode
- SLEEP mode (voltage regulator off): typically 14 μA
- STANDBY mode (voltage regulator on): typically 22 μA
- Remote wake-up capability via pin LIN
- Local wake-up via pins WAKE1 and WAKE2
- Configurable level-sensitive wake-up detection
- Cyclic sampled wake-up detection option with synchronized bias control via pin
- HVMPO
- Wake-up source recognition
- Configurable high-voltage multipurpose output (HVMPO)
- Bias control output for cyclic wake-up
- Limp home output
- Bias control output for battery monitoring circuit
- General purpose input (GPI) controlled output
- Limp home function on overtemperature, watchdog service fail, VCC Undervoltage and RSTN short-circuit to ground
- Overtemperature shutdown
- Bidirectional reset pin with variable power-on reset length
LIN Transceiver / Standards Compliant
- ISO 17987-4:2016 (12 V LIN) compliant
- LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A compliant
- SAE J2602-1 compliant
- K-line compatible
- Baud rate up to 20 kBd
- LIN high-speed mode with fast LIN slope to support high baud rates (> 20 kBd)
- Integrated termination resistor for LIN follower applications
- The TXD dominant time-out function
Designed for Automotive Applications
- Qualified according to AEC-Q100
- Load dump pulse protected against up to 43 V
- ±8 kV Electrostatic Discharge (ESD) protection, according to the Human Body Model (HBM) on LIN-bus pin
- ±6 kV ESD protection according to IEC 61000-4-2 on pins BAT, WAKE1, WAKE2 and ±8 kV on pin LIN
- The Bus terminal and battery pin protected against transients in the automotive environment (ISO 7637)
- LIN-bus pin short-circuit proof to battery and ground
Package
- Leadless HVSON14 package (3.0 mm x 4.5 mm) supporting Automated Optical Inspection (AOI) capability and low thermal resistance
TJA1128 LIN Mini SBC Family Overview (Variants)
The TJA1128 LIN mini SBC family consists of 8 variants as shown in the table below:
|
Family Member 1 (Variant) |
Features and Options |
|||||||
|
Basic Features |
Optional Features |
|||||||
|
LIN Transceiver² |
LDO |
GPI |
HVMPO² |
Wake #1² |
Wake #2² |
Watch-dog² |
||
|
5V0 |
3V3 |
|||||||
|
TJA1128A |
|
85mA |
- |
|
|
|
- |
- |
|
TJA1128B |
|
- |
85mA |
|
|
|
- |
- |
|
TJA1128C |
|
85mA |
- |
|
|
|
|
- |
|
TJA1128D |
|
- |
85mA |
|
|
|
|
- |
|
TJA1128E |
|
85mA |
- |
|
|
|
- |
|
|
TJA1128F |
|
- |
85mA |
|
|
|
- |
|
|
TJA1128G |
|
85mA |
- |
|
|
|
|
|
|
TJA1128H |
|
- |
85mA |
|
|
|
|
|
1. All variants use the (leadless) HVSON14 package supporting Automated Optical Inspection (A.O.I.)
2. Configurable via End-of-Line device configuration
Product Programs
Related products
Quad LIN Commander Transceiver for In-Vehicle Subnetworks
Buy/Parametrics
|
|
|
|
|
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Documentation
Quick reference to our documentation types
Design Resources
Hardware
Quick reference to our
board types.
1 hardware offering
-
Evaluation and Development BoardsEvaluation Board for TJA1128 LIN Mini System Basis Chip
Active